How Do I Calculate The Number Of Tiles I Need?

How to Figure Out How Many Tiles You'll Need

• Find out how long one wall of the room is. If you are working on a wall, measure its vertical and horizontal dimensions.
• Find out how much space there is on the opposite wall. If you're working on a wall, measure its length from left to right.
• Add up the two numbers and multiply them. The total square footage of the work area is calculated by multiplying the length by the breadth. If the room is 10 feet broad and 12 feet long, for instance, multiply 10 by 12 to get the square footage. This space has a total area of 120 square feet.
• Calculate the quantity of tile required based on the area covered. It is customary to purchase an entire box of tile at a time. Divide the total square footage of the room by the number of tiles in a single box to get the approximate number of tiles required. Let's pretend that each box of tile is 10 square feet in size for this illustration. Hence, if you require 120 square feet, you will need to purchase at least 12 boxes because 120 is divisible by 12 more than once.
• Find out how much extra you'll need. Never purchase exactly the number of tiles you'll need, as you'll inevitably need some extra for cuts, waste, breaks, and mistakes. Simply multiply the room's square footage by 10% and add the result to the existing total. You should buy this many square feet in total. Using the same scenario as before,. 10 x 120 = 12, and 120 + 12 = 122. A total of 122 square feet of tile is required.
• The necessity to replace a few broken tiles is another good reason to stock up. This is especially true if the tile's design or colour has been discontinued. If you don't, it will require a full floor replacement to fix. The lesson here is to invest more initially so as to reap savings afterwards.

What You'll Need:

• Measuring tape
• Calculator (optional)
• Pen or pencil
• Paper

You Should Take Measurements of the Area You Intend to Tile

Take accurate measurements of the shaped area you'll be tiling:

• You may calculate the square footage of a wall or floor by multiplying its length by its breadth. If the length or width isn't a whole number (since the measurement contains both feet and inches), divide the fraction by 12 to get the equivalent in feet, then add that decimal to the length or width. If there is a decimal in the region, round up to the closest foot.

A wall that is 10 feet on each side would have a 100-square-foot surface area (10 x 10).

Rounding up to 75 square feet, the size of a floor that is 6.75 feet wide by 11 feet long is 74.25 square feet (6.75 x 11).

• Square the radius (half the diameter) and multiply by 3.14 to get the area of a circular surface like a floor.

A 20-foot-diameter floor would have an area of 314 square feet (3.14 x 10 x 10).

• See and deal with areas of unusual shape, such an L-shaped floor, as though it were divided in half. Areas of the separate components can be calculated and added.

If your floor is L-shaped, you could theoretically create two 3-by-6-foot rectangles. There would be a 36-square-foot floor space (6 x 3 x 2).

Determine the Quantity of Tile Boxes or Individual Tiles Required by Measuring the Area to Be Tiled

Calculate how much time you need to buy tiles to cover the area you just measured. The calculation changes if you're looking for single tiles or boxes of tile (the latter being more frequent for standard-sized walls or floors) (for small floors or walls, such as those in a half bath).

• To determine how many boxes of tiles you need, divide the total square footage of your project by the per-unit total given. The box will state the total area that can be covered by the tiles inside. The size of the tiles is irrelevant. If the value is decimal, round it up to the next whole number.

Given that each box of tile covers 12.5 square feet, eight boxes would be required to cover an area measuring 100 square feet.

• If you're planning on purchasing individual tiles, it's important to know how many square feet (or what percentage of a square foot) they cover. The package for individual tiles will include the tile's exact dimensions in inches. To calculate the square inches covered by a single tile, multiply its length by its breadth. To get square feet, take the answer and divide it by 144. The number of tiles required can be calculated by dividing the area to be tiled by the tile's square footage. Round to the nearest whole number once more.

The area covered by a tile of 6x6 inches is 0.25 square feet (36 divided by 144). The minimum number of tiles required to cover a 50 square foot wall or floor is 200 (50 / 0.25). We provide a wide variety of tile remodels in Melbourne from which to pick when planning a new look for your home.

Finalise Your Calculations by Adding an Extra 10%-20%

Expert tilers know better than to acquire just enough materials to cover a wall or floor. There are numerous cases that call for a bit more:

• Extra tiles may be required to cut smaller pieces of tile to fit into tight spaces on the wall or floor.
• It's possible that some of the damaged tiles you order won't even make it to you. (Two or three percent of tiles sold in boxes are typically damaged in some way.)
• When working with tiles, whether cutting, placing, or fixing broken ones, accidents can and do happen.
• After installation, if a tile comes loose, you may need to replace it.
• Your tile could be made obsolete in the long run. If the tile you love is ever discontinued, you'll be glad you bought a few extras to serve as replacements. Otherwise, you could have to retile the entire floor or wall, or worse, replace damaged tiles with tiles that don't match the rest.
• If you want to be safe, you should buy at least 10% more tile than you need.
• Round up the tile number you calculated in the previous step if it has a decimal place, then multiply it by 1.1. In other words, if you think you'll need eight boxes of tile, purchase nine (8 x 1.1). Instead of purchasing the 200 tiles you estimated you'd need, invest in 220. (200 x 1.1).
• If you want to try something fancy like a herringbone or a diagonal offset, you may need to set aside as much as 20% extra. More tile pieces are typically left behind when installing tile in these patterns on the diagonal (i.e., at a 45-degree angle from the base of the wall or floor) as opposed to horizontally (where the edge of the tile meets the edge of the floor or wall).

Tips on Taking Tile Measurements

For Wall Tiles

The following basic procedure may appear daunting at first, but it will prove invaluable as you embark on your DIY tile job. A measuring tape, some paper and pencil, and perhaps a calculator, will come in handy.

• Make a rough drawing of the walls (not to scale) and count each square as its own area.
• Measure the width in millimetres and then divide that number by the tile's width. This will give you the width of your region in tiles.
• Figure out how high you want your tiles to go (this includes the ceiling). This height should be measured in millimetres and then divided by the tile height. The number of tiles above your current location is displayed here.
• Simply multiply the tiles' width by their height to get the answer.
• For each sheet wall you drew, follow these instructions again.
• In order to calculate the total number of tiles needed, sum up the individual counts and then subtract 10% to account for waste.

Have you prepared your wall for tiling? Check out our do-it-yourself wall-tiling guide if you're interested.

Wall Measurements

Doors and windows are typically added to the corners of rectangular openings cut into the wall. No need to stress if your walls are an odd form. Even now, you can use the steps below.

To begin, determine the total length of the wall and deduct the sizes of any openings.

For this particular case, let's say that we want a wall that is 50 cm wide and 400 cm long.

Then, take accurate measurements of the wall's dimensions (keeping in mind that you'll only need to measure the section of wall you intend to tile). Then you just multiply by two.

• 20,000cm / 10,000cm = 2.0㎡
• 400cm x 50cm = 20,000 ㎠
• Remember to do the ㎡ conversion!

Take some measurements of the door and window openings now.

For this scenario, we'll choose a door size of 50cm x 80cm and a window size of 50cm x 50cm.

• 50cm x 50cm= 2,500㎠
• 50cm x 80cm = 4,000㎠ 

Once again, you'll have to do a m2 conversion.

• 2500cm / 10,000cm = 0.25㎡
• 4,000cm / 10,000cm = 0.4m㎡

The next step is to add the combined dimensions of the door and window.

• 0.4㎡ + 0.25㎡ = 0.65㎡

The number of tiles required for the area can be calculated by subtracting this figure from the original wall size.

• 2.0㎡ – 0.65㎡ = 1.35㎡

Remember that you must add 10% to account for waste (breakages and cuts).

With a quick calculation, you can find out how many tiles you'll need for that beautiful new wall.

We understand that you may still require assistance after reading the foregoing, however. So that you can focus on the tiles themselves, we've included a tile calculator on every single one of our product pages.

Gap Size

When tiling a floor or wall, spaces are usually left between individual tiles because, despite their superficial similarities, tiles are rarely exactly the same shape or size. These spaces are typically filled with grout, hence the popular usage of the terms "grout size" and "grout lines." The grout between tiles can be anything from a sixteenth of an inch to half an inch in width. Grout is a type of concrete.

The spaces between them change depending on the tile's size, material, and layout. Rectified tiles (tiles that undergo further processing to guarantee they are uniform) can allow for narrower spacing, despite the fact that this is often more difficult to achieve due to the lack of uniform shape and size of tiles. Grout lines may be less noticeable in materials like granite, where tiles are often cut consistently.

Roofing tiles and wood siding on walls are examples of materials that, rather than having a gap between them, overlap to prevent water seepage. Both of these cases are handled by the tile calculator. If the tiles used do not overlap, provide a positive value; otherwise, enter a negative value.

Options for Laying Tile

Size

There is a wide variety of tile sizes available, from 3/8-inch mosaics to 24-by-48-inch slab tiles. The most common, widely available, and simplest to set up are square (identical width and length) shapes. Tiles with straight sides (rectangular, square, and parallelogram) are the most frequent, but there are other, more unusual shapes available as well. The less grout there is between the tiles, the more open and clean the room will look. There will be more waste when putting larger tiles, but the use of smaller tiles can assist provide texture to a space.

Material

Ceramic, porcelain, glass, quarry, and natural stone are just a few of the various categories of tiles available. The most budget-friendly and stylish option is to use ceramic or porcelain tiles. Although they shouldn't be used for flooring due to their fragility, glass tiles are a popular choice for bathroom and kitchen backsplashes due to their eye-catching appearance. Quarry tiles, with their naturally rough surfaces, are frequently found in outdoor and commercial kitchen settings where traction is a priority. Stone tiles, such as marble and granite, offer one-of-a-kind, naturally occurring stone patterns, textures, and colours that are challenging to replicate in ceramics. They give the impression of vanishing into the grout lines for a more unified appearance.

Layout Pattern

Tiles can be laid in a variety of patterns. The most popular layout is a square or rectangle on a rectangle, or a square or rectangle on an angle, forming a diamond.

Similar to how brick walls are constructed, running bond tile layouts use offset rows or columns of tiles, typically with a 2:1 length to edge ratio. Materials are increased by around 10% when running bonds are used.

Aligning tiles at 45- or 90-degree angles creates a herringbone pattern. Herringbone layouts, like running bond layouts, waste more material than straight-line designs. If you're looking for Melbourne home repairs to aid in the construction of your ideal home, we can help.

Conclusion

When renovating a room, it is important to budget for more tiles than you need to completely cover the area. To prevent a material shortage during installation, it is prudent to order up to a 15% buffer. Calculating how many tiles do you need is easy with a calculator, measuring tape, and tape measure. Estimating how many tiles you'll need is the first step in tiling any area, from the entrance floor to the walls of the kitchen or bathroom. Get a measuring tape and a calculator, as the procedures for calculating tile requirements are consistent across surfaces.

You can estimate the number of tiles you'll need and the total cost of the job with just a measuring tape and some basic math. To calculate the quantity of tile required, measure the vertical and horizontal dimensions of the wall, measure the space on the opposite wall, add up the two numbers and multiply them, and calculate the total square footage of the work area by multiplying the length by the breadth. You should also take accurate measurements of the shaped area you'll be tiling and calculate the square footage of a wall or floor by multiplying its length. Divide the length or width of a floor by 12 to get the equivalent in feet, then add that decimal to the length and width. Square the radius (half the diameter) and multiply by 3.14 to get the area of a circular surface like a floor.

Calculate the quantity of Tile Boxes or Individual Tiles required by measuring the area to be tiled and dividing the total square footage of the project by the per-unit total. If the value is decimal, round it up to the next whole number. For example, if each box of tile covers 12.5 square feet, eight boxes would be required to cover an area measuring 100 square feet. For individual tiles, it is important to know how many square feet (or what percentage of a square foot) they cover. The number of tiles required to cover a wall or floor can be calculated by dividing the area to be tiled by the tile's square footage and rounding to the nearest whole number.

Expert tilers recommend adding an extra 10%-20% to cover a range of cases, such as cutting smaller pieces of tile to fit into tight spaces on the wall or floor, or replacing damaged tiles with tiles that don't match the rest. To be safe, it is important to round up the tile number if it has a decimal place and multiply it by 1.1. The most important details in this text are the steps needed to prepare a DIY tile job. These steps include making a rough drawing of the walls, measuring the width in millimetres, dividing the tiles' width by their height, calculating the total number of tiles needed, subtracting 10% to account for waste, and taking accurate measurements of the wall's dimensions. Finally, taking measurements of the door and window openings.

These steps will help you determine the total length of the wall and deduct the sizes of any openings. Tiling a floor or wall requires a number of tiles, ranging from 3/8-inch mosaics to 24-by-48-inch slab tiles. The gap size between tiles is typically filled with grout, which can vary depending on the tile's size, material, and layout. Roofing tiles and wood siding on walls overlap to prevent water seepage, and options for laying tiles include square (identical width and length) shapes. Tiles with straight sides are the most common, but there are other, more unusual shapes available.

Materials include ceramic, porcelain, glass, quarry, and natural stone. Tiles can be laid in a variety of patterns, such as running bond tile layouts, which use offset rows or columns of tiles with a 2:1 length to edge ratio. Aligning tiles at 45- or 90-degree angles creates herringbone patterns, which waste more material than straight-line designs. 

Content Summary

1. You'll need to have an idea of how big the room is.
2. However, you should budget for more tiles than you need to completely cover the area, as there will inevitably be some waste from breaks and cutouts.
3. Even if you don't know how to measure for tiles or calculate square metres, you can treat walls and floors the same while measuring.
4. Calculating how many tiles you'll need for a job is a breeze, and this tool makes it much simpler.
5. Type in the dimensions of the space that needs protecting.
6. The number of square feet of tile you'll need and the exact number of tiles in the size you requested will be displayed when you select the tile size from the drop-down menu and click the "calculate" button.
7. You should give some thought to your tiling requirements before heading out to the store.
8. Estimating how many tiles you'll need is the first step in tiling any area, from the entrance floor to the walls of the kitchen or bathroom.
9. Using this method, you can plan for the right amount of tile, stick to your budget, and prevent unnecessary excursions to the hardware store.
10. Get a measuring tape and a calculator, because the procedures for calculating tile requirements are consistent across surfaces.
11. You may estimate how long it will take you to lay your tile floor or the cost of the materials you'll need.
12. You can estimate the number of tiles you'll need and the total cost of the job with just a measuring tape and some basic math.
13. Find out how long one wall of the room is.
14. Find out how much space there is on the opposite wall.
15. Add up the two numbers and multiply them.
16. The total square footage of the work area is calculated by multiplying the length by the breadth.
17. This space has a total area of 120 square feet.
18. Calculate the quantity of tile required based on the area covered.
19. It is customary to purchase an entire box of tile at a time.
20. Divide the total square footage of the room by the number of tiles in a single box to get the approximate number of tiles required.
21. Find out how much extra you'll need.
22. Simply multiply the room's square footage by 10% and add the result to the existing total.
23. A total of 122 square feet of tile is required.
24. The lesson here is to invest more initially so as to reap savings afterwards.
25. If the length or width isn't a whole number (since the measurement contains both feet and inches), divide the fraction by 12 to get the equivalent in feet, then add that decimal to the length or width.
26. A wall that is 10 feet on each side would have a 100-square-foot surface area (10 x 10).
27. Rounding up to 75 square feet, the size of a floor that is 6.75 feet wide by 11 feet long is 74.25 square feet (6.75 x 11).
28. Square the radius (half the diameter) and multiply by 3.14 to get the area of a circular surface like a floor.
29. See and deal with areas of unusual shape, such an L-shaped floor, as though it were divided in half.
30. If your floor is L-shaped, you could theoretically create two 3-by-6-foot rectangles.
31. Calculate how much time you need to buy tiles to cover the area you just measured.
32. To determine how many boxes of tiles you need, divide the total square footage of your project by the per-unit total given.
33. The box will state the total area that can be covered by the tiles inside.
34. The size of the tiles is irrelevant.
35. If the value is decimal, round it up to the next whole number.
36. The number of tiles required can be calculated by dividing the area to be tiled by the tile's square footage.
37. The minimum number of tiles required to cover a 50 square foot wall or floor is 200 (50 / 0.25).
38. We provide a wide variety of tile remodels in Melbourne from which to pick when planning a new look for your home.
39. Expert tilers know better than to acquire just enough materials to cover a wall or floor.
40. There are numerous cases that call for a bit more: Extra tiles may be required to cut smaller pieces of tile to fit into tight spaces on the wall or floor.
41. It's possible that some of the damaged tiles you order won't even make it to you. 
42. After installation, if a tile comes loose, you may need to replace it.
43. If you want to be safe, you should buy at least 10% more tile than you need.
44. Round up the tile number you calculated in the previous step if it has a decimal place, then multiply it by 1.1.
45. In other words, if you think you'll need eight boxes of tile, purchase nine (8 x 1.1).
46. Instead of purchasing the 200 tiles you estimated you'd need, invest in 220. (
47. A measuring tape, some paper and pencil, and perhaps a calculator, will come in handy.
48. Make a rough drawing of the walls (not to scale) and count each square as its own area.
49. Measure the width in millimetres and then divide that number by the tile's width.
50. This will give you the width of your region in tiles.
51. Figure out how high you want your tiles to go (this includes the ceiling).
52. This height should be measured in millimetres and then divided by the tile height.
53. The number of tiles above your current location is displayed here.
54. Simply multiply the tiles' width by their height to get the answer.
55. Check out our do-it-yourself wall-tiling guide if you're interested.
56. Then, take accurate measurements of the wall's dimensions (keeping in mind that you'll only need to measure the section of wall you intend to tile).
57. Take some measurements of the door and window openings now.
58. With a quick calculation, you can find out how many tiles you'll need for that beautiful new wall.
59. So that you can focus on the tiles themselves, we've included a tile calculator on every single one of our product pages.
60. When tiling a floor or wall, spaces are usually left between individual tiles because, despite their superficial similarities, tiles are rarely exactly the same shape or size.
61. These spaces are typically filled with grout, hence the popular usage of the terms "grout size" and "grout lines."
62. The grout between tiles can be anything from a sixteenth of an inch to half an inch in width.
63. Grout is a type of concrete.
64. The spaces between them change depending on the tile's size, material, and layout.
65. Both of these cases are handled by the tile calculator.
66. If the tiles used do not overlap, provide a positive value; otherwise, enter a negative value.
67. There is a wide variety of tile sizes available, from 3/8-inch mosaics to 24-by-48-inch slab tiles.
68. Tiles with straight sides (rectangular, square, and parallelogram) are the most frequent, but there are other, more unusual shapes available as well.
69. The less grout there is between the tiles, the more open and clean the room will look.
70. There will be more waste when putting larger tiles, but the use of smaller tiles can assist provide texture to a space.
71. Material Ceramic, porcelain, glass, quarry, and natural stone are just a few of the various categories of tiles available.
72. The most budget-friendly and stylish option is to use ceramic or porcelain tiles.
73. Tiles can be laid in a variety of patterns.
74. The most popular layout is a square or rectangle on a rectangle, or a square or rectangle on an angle, forming a diamond.
75. Similar to how brick walls are constructed, running bond tile layouts use offset rows or columns of tiles, typically with a 2:1 length to edge ratio.
76. Materials are increased by around 10% when running bonds are used.
77. Aligning tiles at 45- or 90-degree angles creates a herringbone pattern.
78. Herringbone layouts, like running bond layouts, waste more material than straight-line designs.